Ways to relocate a baby grand piano

Pianos consistently make movers yearly list of items that are most regularly damaged. Grand pianos are particularly troublesome. Practicing the following treatments for taking apart, padding and packing grand pianos will prevent damage, lower claims cost, and improve customer fulfillment.

1) At least three individuals are needed to deal with an infant grand piano. If the baby grand piano needs to increase or down stairs or if a full or show grand piano requires to be transferred, a minimum of 4 people are required.

2) Constantly complete a precise and thorough inventory. It might be necessary or more suitable to utilize a visual inventory to properly explain and reveal pre-existing damage.

3) As numerous parts are disassembled, please location all hardware in a properly labeled parts bag and then put the parts bag in a "Parts Box".

4) Eliminate the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a tidy furnishings pad.

5) Disconnect the lid by removing the hinge pins. Have a single person wiggle the lid, holding it opposite the hinge, while a 2nd person works the pin loose. Please be cautious not to harm the wood with the pliers or with the pin itself. If needed, cover the jaws of the pliers with a little cloth to help avoid damage to the wood. Wrap the lid in a clean furnishings pad.

6) Get rid of the prop that holds the lid open and wrap it in a tidy furnishings pad. The prop has a hinge pin and is in two pieces.

7) Get rid of the pedal assembly and cover it in a clean furnishings pad. The braces at the back of the assembly rest in slots at each end. When getting rid of the screws, please be cautious not to drop the braces. In addition, please be especially mindful with the push-rods so that they will not get bent. As you face the piano, number the push-rods from delegated right as "1", "2", and "3", by putting a piece of masking tape with the appropriate number on each rod. Note: If masking tape is not available, please use properly labeled parts bags for this function. When reassembling at destination, please make certain to put the rods in the correct order so that the pedals will work effectively.

8) Pad the piano by placing a clean rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to avoid it from flopping open while you deal with the piano. Cover the top of the piano with two clean furnishings pads, nicely folded around the keyboard. Usage elastic band to secure the pads. Note: Please guarantee that the surface area of the piano is dust-free prior to padding it. Padding an extremely sleek surface area that is dirty might trigger great scratches, particularly on a black lacquer finish.

9) Position a piano board and attach the straps so that it is prepared to receive the piano. The raised brace on the piano board should be at the keyboard end of the piano.

10) Eliminate the left front leg by placing one person beneath the piano at the left end of the keyboard. Be sure to have 2 people lifting the corner of the piano while the 3rd individual eliminates the leg. Keep in mind: Please be sure to note which legs were eliminated from which positions since some pianos have legs that are not interchangeable.

11) Place the piano on the piano board by decreasing the "leg-less" end onto the board. Please make More about the author sure to raise the entire piano somewhat while finishing this maneuver to avoid undue pressure on the remaining, connected legs as the piano tips. Raise the piano to an upright position on the board. Keep in mind: Please ensure that the soundboard is protected before lifting. Make sure that the piano is focused comfortably versus the brace at the end of the piano board. Note: Never leave the piano unattended. Always have at least someone holding the piano consistent at all times.

12) Get rid of the two remaining legs and cover them in tidy furniture pads. These legs are held in place by a "crucial and slot" plan. To eliminate the leg, slide it inward toward the center of the piano till it comes out of the slot.

13) Protect the piano to the piano board by bringing completions of the straps together and securing them. Place folded burlap pads over the furnishings pads but under the straps to provide extra security to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the 2 straps together.

14) To move the piano over a flat, level surface, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.

15) To move the piano up or down stairs, utilize the piano board as a skid. After sufficiently padding the stairs for defense versus residence damage, position the keyboard end of the piano toward the bottom of the stairs. Attach a hump strap to the leading end of the piano board to prevent the piano from slipping.

16) To pack the piano, leave it on the piano board and location it in a tier as the first base product with the keyboard facing the wall of the preceding tier. The finest place to load the cushioned lid is in between the piano and the preceding tier or between the piano and the wall.

Although grand pianos represent a significant obstacle, they can be moved without damage by using sound judgment and practicing the treatments noted above.

Leave a Reply

Your email address will not be published. Required fields are marked *